Supplemental Information; Laser Setup - Omron LD-60 User Manual

4.4 Supplemental Information

Laser Setup

For most installations, the defaults for the lasers should be appropriate, and will not require
any user adjustment.
The specific parameters for these lasers will come in the model config file that ships on the
unit, or can be provided on request if needed.
Laser_1 Settings are for the main scanning laser (S300), used both for safety and loc-
l
alization.
Laser_2 Settings are for the low front laser (TiM).
l
Laser_3 Tilted and Laser_4 Tilted are for the side lasers (TiM).
l
Chapter 4: Configuration
Parameter
AbsoluteMaxRotAccel
AbsoluteMaxRotDecel
LD Platform User's Guide, 11970-000 Rev E
Page 50 of 142
Default Min Max
180 1 360
180 1 360