Safety Information; Overview; Warning And Caution Symbols; Safety Precautions - Omron Regular Payload Series Hardware Installation Manual

2. Safety Information

2.1 Overview

The user shall read, understand and abide by the safety information provided in this manual before using the TM
Robot.

2.2 Warning and Caution Symbols

The Table below shows the definitions of the warning and caution levels described in each paragraph of this
Manual. Pay close attention to them when reading each paragraph, and observe them to avoid personal injuries or
equipment damage.

2.3 Safety Precautions

DANGER:
This product can cause serious injury or death, or damage to itself and other equipment, if the
following safety precautions are not observed.
All personnel who install, operate, teach, program, or maintain the system must read the "Hardware

installation Manual", "Software Manual", and "Safety Manual" according to the software and hardware
version of this product, and complete a training course for their responsibilities in regard to the robot.
All personnel who design the robot system must read the "Hardware installation Manual", "Software Manual",

and "Safety Manual" according to the software and hardware version of this product, and must comply with
Regular Payload Series-Hardware Installation Manual TM5 Series
DANGER:
Identifies an imminently hazardous situation which, if not avoided, is likely to result in
serious injury, and might result in death or severe property damage.
WARNING:
Identifies a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, and might result in serious injury, death, or significant property damage.
CAUTION:
Identifies a potentially hazardous situation which, if not avoided, might result in minor
injury, moderate injury, or property damage.

Table 2: Warning and Caution Symbols

Read Manual and Impact Warning Labels
10