Installing The Shelf Controller Cards And Fabric Cards - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Installing the Shelf Controller Cards and Fabric
Cards
This chapter provides instructions on installing the shelf controller cards and fabric cards in the Cisco NCS
6000 Fabric Card Chassis (FCC).
This chapter also includes instructions for installing a multi-chassis fabric card in the Cisco NCS 6000
Note
Line Card Chassis (LCC) which is a component of the Cisco NCS 6000 Multi-Chassis system.
Throughout this chapter, abbreviated terms are used to identify the formal names of the cards that make up
the Cisco NCS 6000 Multi-Chassis system.
Table 6: Abbreviated Terms for Cisco NCS 6000 Shelf Controller and Fabric Cards
Cisco Product Name
NCS FCC Shelf Controller
NCS FCC (Combo) Shelf Controller Switch Card
NCS FCC S2 Fabric Card
NCS FCC S2 Fabric Card, 2nd Generation
1
NCS 6008 Multi-Chassis Fabric Card
NCS 6008 Universal Fabric Card
1 Required for 2T multi-chassis mode
The Cisco NCS 6000 FCC ships with a minimum of six S2 FCs, six impedance carriers
Note
FC Impedance Carrier), and either one or two SC cards or SC-SW cards preinstalled in the FCC.
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
5
C H A P T E R
Cisco Product ID Abbreviated Term
NCS-F-SC SC card
NCS-F-SCSW SC-SW card
NCS-F-FC S2 FC
NCS-F-FC2 S2 FC2
NC6-FC-MC S13 MC FC
NC6-FC2-U UFC
(Figure 42: S2
61