Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual page 196

Cabling a Multi-Chassis Configuration
Multi-Chassis 4+2 Configuration
FCs are installed. The figure shows the 4+2 connections for one fabric plane. To complete the configuration,
you must repeat the cabling for the remaining five fabric planes until all 24 S2 cards are connected.
Figure 85: Cisco NCS 6000 Multi-Chassis 4+2 Configuration with 24 S2 FC ' s
The following tables show the cabling plan for a 4+2 multi-chassis configuration with 24 SC FCs installed.
The FCC0 has the fabric instances 0 through 5 for planes 0, 2, and 4. The FCC1 has the fabric instances 0
through 5 for planes 1, 3, and 5.
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
182