Optical Module Ids - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

System Product IDs

Optical Module IDs

Table 20: Optical Module IDs
Component Product ID
SFP modules SFP-10G-SR
SFP-10G-LR
QSFP modules QSFP-40G-SR4
QSFP-40G-LR4
Optical module set NCS-FAB-OPT
NCS-FAB-OPT2
9
9 Required for 2T multi-chassis mode
Description
Short reach SFP 10GE transceiver module
Long reach SFP 10GE transceiver module
Short reach QSFP 40GE optical module (SC-SW card only)
Long reach 40GE QSFP optical module (SC-SW card only)
Optical module set that includes 96 CXP-100G-SR12 modules for multi-chassis
configurations.
Two optical modules sets are required for each LCC: one set plugs into the
MC S13 FCs on the LCC, one set plugs into the S2 FC cards in the FCC.
Optical module set that includes 96 ONS-CXP2-SR25 modules for 2T
multi-chassis configurations.
Two optical modules sets are required for each LCC: one set plugs into the
UFCs on the LCC, one set plugs into the S2 FC2 cards in the FCC.
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
Optical Module IDs
135