Table of Contents
Advertisement
Installing the Shelf Controller Cards and Fabric Cards
Use the Status LED, located on the faceplates of an SC or SC-SW card, to verify the correct installation of
the card.
Figure 46: SC Card Front Panel and LEDS
1
Status LED
2
Attention LED
3
Two expansion port LEDs (EXP0 and EXP1)
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
Verifying the Installation of an SC or SC-SW Card
4
MGMT port LEDs (Link and Activity)
5
Three alarm LEDs (Critical, Major, Minor)
75
Advertisement
Table of Contents
