Environmental Specifications - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

System Specifications
Power Enclosure Components
Input current
AC Input
Nominal input voltage
Nominal line frequency
Recommended AC service
AC Power Cord Length

Environmental Specifications

Table 15: Cisco NCS 6000 FCC Environmental Specifications
Temperature
Humidity
Altitude
FCC airflow
Power system airflow
Air exhaust temperature
50 A max at –48 VDC
40 A max at –60 VDC
60 A at –40 VDC (maximum)
Single-phase
200 to 240 VAC (range 180 to 264 VAC)
50/60 Hz (range 47 to 63 Hz)
20-A (North America) dedicated branch circuit
16-A (International) dedicated branch circuit
167 in. (4.25 m)
Operating, nominal: 41 to 104°F (5° to 40°C)
Operating, short-term: 23 to 122°F (–5° to 50°C)
Nonoperating: –40 to 158°F (–40° to 70°C)
Operating, nominal: 5 to 85%, noncondensing
Operating, short-term: 5 to 90%, noncondensing
Nonoperating: 5 to 93%, noncondensing
Operating: –200 to 13,800 ft (–61 to 4206 m) at 104°F (40°C)
Nonoperating: Up to 16,000 ft (4877 m) at –13°F (–25°C), short-term
2000 CFM (Cubic Feet per Minute)
Up to 56,600 liters per minute
Up to 3400 liters per minute
122°F (50°C)—at room temperatures of 95 to 102°F (35 to 39°C)
140°F (60°C)—maximum exhaust temperature on a fully loaded system during worst-case operating
conditions (50°C and 6000 ft altitude)
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
Environmental Specifications
7
129