Appendix A System Specifications; Fabric Card Chassis Specifications - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Table of Contents

Advertisement

System Specifications
This appendix contain tables that list the specifications for the main components of the Cisco NCS 6000
Fabric Card Chassis (FCC).

Fabric Card Chassis Specifications

Table 13: Cisco NCS 6000 FCC Chassis Specifications
Supported Cards and Modules
Fabric Chassis Dimensions
Height
Width
Depth
Aisle spacing
Fabric Card Chassis Specifications, page 127
Power Specifications, page 128
Environmental Specifications, page 129
Regulatory, Compliance, and Safety Specifications, page 130
Up to 12 S2 fabric cards (FCs), two SC or SC-SW shelf controller cards, and two fan
trays.
76.60 in. (205.7 cm) as shipped
84.0 in. (213.4 cm) as installed with the power shelf
23.6 in. (59.9 cm)
35.3 in. (89.7 cm) as installed with optional AC PDU brackets on each side of the FCC
39.0 in. (99.1 cm) without exterior cosmetics
42.0 in. (106.7 cm) with all exterior cosmetics
To install the FCC (front): 48 in. (122 cm)
To service FRUs (front): 31.7 in. (80.5 cm)
To service FRUs (rear): 14.0 in. (35.6 cm)
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
A
A P P E N D I X
127

Advertisement

Table of Contents
loading

Table of Contents