Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual page 61

Installing the Power Components
Installing an AC or DC Power Module
Each PM has three status LEDs located on the front left side of its faceplate (Figure 34: AC and DC Power
Module Power Module Status Indicators). See Table 5: Power Module LED Status Indicator Lights for the
meaning of each status LED.
Figure 29: AC Power Module — Front View
Figure 30: AC Power Module — Rear View
Figure 31: DC Power Module — Front View
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
47