Cabling The Fabric - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Cabling a Multi-Chassis Configuration
From Line Card Chassis
LCC1
Table 25: SC-SW and SC Card Connections (2+2 Configuration)
From SC-SW Card
FCC0, SC0 EXP0
FCC0, SC0 EXP1
FCC1, SC0 EXP0
FCC1, SC0 EXP1
FCC0, SC0 HS0 (40GE)
FCC0, SC0 HS1 (40GE)
From SC Card
FCC0, SC1 EXP0
FCC0, SC1 EXP1
FCC1, SC1 EXP0
FCC1, SC1 EXP1

Cabling the Fabric

This section describes how to configure the fabric cabling between the LCCs and the fabric components in
the FCCs. The fabric provides the data connection for router traffic between all the CXP optical ports in the
LCCs. The fabric cabling must be completed to enable data communications through the Cisco NCS 6000
Multi-Chassis system.
LCC RP Port
RP0, EXP0
RP1, EXP0
RP0, EXP1
RP1, EXP1
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
To SC-SW Cards in Fabric Card
Chassis
FCC0, SC0 any switch port
FCC0, SC0 any switch port
FCC1, SC0 any switch port
FCC1, SC0 any switch port
To SC-SW Card
FCC0, SC0 any switch port
FCC1, SC0 any switch port
FCC0, SC0 any switch port
FCC1, SC0 any switch port
FCC1, SC0 HS0 (40GE)
FCC1, SC0 HS1 (40GE)
To SC-SW Card
FCC0, SC0 any switch port
FCC1, SC0 any switch port
FCC0, SC0 any switch port
FCC1, SC0 any switch port

Cabling the Fabric

149