Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual page 47

Installing the Power Enclosure, Power Trays, and Exterior Cosmetics
Installing the Rear Exterior Cosmetics
b) Insert and tighten one pan-head screw to attach the other end of the ground cable to the vertical cable trough.
Step 10
Attach the exhaust air deflector by carefully inserting its mounting tabs into the exhaust plenum brackets. Press the
deflector firmly against the vertical cable troughs until it snaps on.
Figure 20: Exhaust Air Deflector — Rear of the Chassis
1 Exhaust air deflector
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
33