Prerequisites; Required Tools And Equipment - Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Manual

Installing an AC or DC Power Module
Figure 32: DC Power Module — Rear View

Prerequisites

• Installing the Exterior Cosmetics, on page 20
• Installing the Fabric Card Chassis Ground Cable, on page 35
Caution Do not install a power module into an AC or DC power tray until the power tray is securely screwed into
the power enclosure.

Required Tools and Equipment

• ESD-preventive wrist strap
• 6-inch, Number1 Phillips-head screwdriver
Cisco Network Convergence System 6000 Fabric Card Chassis Hardware Installation Guide
48
Installing the Power Components