A590-00-880 Issue D
1. Electrical box
2. Exhaust check valve
3. Cooling-water supply connection
4. Seismic bracket (4 off)
5. RF earth (ground) stud M6
6. Cooling-water return connection
7. Levelling feet (4 off)
1. Protective earth (ground) stud M5
2. Exhaust gas outlet connection
3. d.c. Electrical supply fuse holder (F10)
4. Emergency stop fuse holder (F9)
5. Tool interface module fuse holder (F8)
Page 4
Figure 3 - The controls/connectors on rear of pump
Figure 4 - The controls/connectors on electrics box
Edwards and the Edwards logo are trademarks of Edwards Limited.
8. Nitrogen purge port
9. Castor (4 off)
10. Exhaust enclosure
11. Active gauge connection
12. iTIM connection
13. Rear cover
6. Rear Power on lamp
7. EMS/Tool interface module connection
8. LON module connection
9. Electrical supply connection
© Edwards Limited 2008. All rights reserved.