Fx4010 Dc Physical Description - Comtech EF Data FX series 1005 Administrator's Manual

Comtech EF Data / Stampede

1.8.6 FX4010 DC Physical Description

Front Panel
The front panel has the power button, the
reset button and 5 LEDs to visually indicate
certain vital states of the appliance.
(NOTE: Actual Picture not available at time
of printing)
Front panel from right to left.
1. Power Button
2. Reset Button
LED indicators:
3. Power 0n/Off
4. HDD (on - activity/off - no activity)
5. Management Port (on - Linking / Off - not linking)
6. Auxiliary Port (on - Linking / Off - not linking)
7. Temperature Warning
Back Panel
Using suitable RJ-45 cable, you can connect FX Series FX-4010 System to a computer, or to any other
piece of equipment that has an Ethernet connection; for example, a hub or a switch. Moreover, LAN
(eth 2) / WAN (eth3) are configured as LAN Bypass when failure events occur. (NOTE: Actual Picture
not available at time of printing)
From left to right
LED indicators for MGT (Eth0) and AUX (Eth1) Ports
FX Series Administration Guide - Version 6.2.2
Chapter: Overview - FX Series
Section: FX Series Appliances Data Sheet
1. Inputs for mouse and keyboard
2. (2) USB 2.0 Ports
3. Serial Port
4. VGA Port
5. MGT/Control (Eth0)
6. AUX Port (Eth1)
7. LAN (Eth2) – NOT Shown in Picture
8. WAN (Eth3) – Not Shown in Picture
9. Power-In Socket
On/Flashing indicates that the port is linking.
Off indicates that the port is not linking.
43
MN-FXSERIESADM6 Rev 6