How To Synchronize Configurations In A Wccp Cluster - Comtech EF Data FX series 1005 Administrator's Manual

Comtech EF Data / Stampede

3.6.4 How to Synchronize Configurations in a WCCP Cluster

When multiple FX devices are functioning in a WCCP cluster, each device has unique network settings,
therefore only selected configuration settings are synchronized between the members of the cluster. The
settings which are synchronized include only the following:

HTTP Application Policies

L5 Application Policies

Authorization Realms

QoS Queue Definitions

QoS Filters

QoS Links

QoS Groups

QoS Group Filters
Of the above, HTTP application policy synchronizations take effect immediately, throughout the cluster,
unless the HTTP policy references a newly defined authorization realm. If an HTTP application policy
references a modified realm then a restart of the acceleration service may be required for the intended
change to take effect. The other settings require a restart of the acceleration service to take effect.
FX Series Administration Guide - Version 6.2.2
Chapter: FX Series Configuration
Section: Redundancy
103
MN-FXSERIESADM6 Rev 6