Comtech EF Data FX series 1005 Administrator's Manual page 127

Comtech EF Data / Stampede
CIR: (Kbps):
This is the assigned CIR. Queues that are internal or assigned to a strict-priority link will show "n/a".
MIR: (Kbps):
This is the assigned MIR. Queues that are internal or assigned to a strict-priority link will show "n/a".
Current QOS Stats
WAN:
Output data rate averaged over the previous 5 seconds.
PPS:
Output packet rate averaged over the previous 5 seconds.
Compression (%)
This value indicates the percentage bandwidth reduction due to header and payload compression
averaged over the previous 5 seconds.
Drop Rate:
Drop rate averaged over the previous 5 seconds.
Queue Depth:
Max queue depth over the previous 5 seconds.
Average Rate:
This average is set with the average time period pull down menu shown above. Average time can be 1, 24
or 72 hours, 30 days or since the last rest.
The fields in Average Section update at intervals that are a function of the Average Time Period. When
the Average Time Period is set at 1 Hour, the fields update every minute on the minute as given by the
"Since Last Reset" timer and represent the statistics for the previous hour. If the total time is less than an
hour, then the fields represent the data since the last reset.
For example, if it's been 37 minutes, 14 seconds since the reset, then the data represents
the first 37 minutes of traffic. When the Average Time Period is set to either 24 or 72 hours
or 30 days, the fields update every hour on the hour as given by the "since Last Reset" timer.
If the total time is less than the number of hours set by the Average Time Period, then the
fields represent the data since the last reset.
For example, if the Average Time Period is set to 72 hours, and it's been 54 hours, 38 minutes and 18
seconds since the last reset, then the fields represent the first 54 hours of traffic.
The rates are updated every minute and represent the data over the respective interval terminating at
that time.
WAN Rate:
Output data rate averaged over the interval.
PPS:
Output packet rate averaged over the interval.
Compression (%)
This value indicates the percentage bandwidth reduction due to header and payload compression
averaged over the interval.
Bytes Transferred:
Total bytes transferred during the interval.
FX Series Administration Guide - Version 6.2.2
Chapter: FX Series Status
Section: QOS Monitors
127
MN-FXSERIESADM6 Rev 6