Figure 3-22 Fx Series Multicator Transmitter/Receiver Edit Screen - Comtech EF Data FX series 1005 Administrator's Manual

Comtech EF Data / Stampede

Figure 3-22 FX Series Multicator Transmitter/Receiver Edit Screen

Multicator Transmitter Settings
Enable Multicast Transmitter:
This setting enables the multicast transmitter on this appliance.
Incoming FTP User:
This is the user name that must be used when content is uploaded to the FX appliance. The
default is "mc".
Incoming FTP Password:
This is the password that must be used when content is uploaded to the FX appliance. The
default password is "comtech".
Multicator Receiver Settings
Enable Multicast Receiver:
This setting enables the multicast receiver on this appliance.
FTP Server:
This is the IP address of the FTP server into which newly received content will be fanned-out.
FTP User:
This is the user name used when transferring new content to the FTP server.
FTP Password:
This is the password which will be used when transferring new content to the FTP server.
FTP Directory:
This optional parameter is the directory where new content will be transferred. If this directory
does not already exist, it will be created before the file is transferred. The default is none.
FX Series Administration Guide - Version 6.2.2
Chapter: FX Series Configuration
Section: FX Series Multicator
2 of 2
MN-FXSERIESADM6 Rev 6
97