Fx Series Remote General Settings; System Time; Figure 5-1 Fx Series Remote General Edit Screen - Comtech EF Data FX series 1005 Administrator's Manual

Comtech EF Data / Stampede

5 FX Series Remote General Settings

The FX Series Remote appliance works in conjunction with a head-end FX Series ADC appliance. The FX
Series (ADC) appliance resides at the data center and supports connections with multiple remote sites
where FX Series Remote appliances are installed

5.1 System Time

Network time server:
Specify the host address for which the RWOC will attempt to synchronize its time via the "Network Time
Protocol". The RWOC performs this synchronization one minute following a restart and once per week
thereafter.
Time zone:
This selector allows you to specify a time zone in which the RWOC resides. In most cases, the default
value of UTC-0 (GMT) is desirable because this will facilitate correlating system events with
troubleshooting and other logs.
FX Series Administration Guide - Version 6.2.2
Chapter: FX Series Remote General Settings
Section: System Time

Figure 5-1 FX Series Remote General Edit Screen

109
MN-FXSERIESADM6 Rev 6