Management Settings; How To Configure Network Interfaces; Figure 3-2 Fx Series Basic Network Interfaces Screen - Comtech EF Data FX series 1005 Administrator's Manual

Comtech EF Data / Stampede

3.2 Management Settings

3.2.1 How to Configure Network Interfaces

The FX Series reserves two ports, management and auxiliary, for management traffic. This traffic is
isolated from the ports in which accelerated traffic flows. These interfaces are tied to a management
routing table which is not used for accelerated traffic.
Management Interface
The management interface corresponds to the "eth0" Ethernet port. Typically the management interface
is connected to a private network where system management tools such as ssh, the management web
GUI, and SNMP are utilized.
FX Series Administration Guide - Version 6.2.2
Chapter: FX Series Configuration
Section: Management Settings

Figure 3-2 FX Series Basic Network Interfaces Screen

62
MN-FXSERIESADM6 Rev 6