Multi-Purpose Tray Unit - Canon LBP1760P Service Manual

CHAPTER 3
F. Multi-purpose Tray Unit
1. Removal from the printer
1) Remove the top cover unit, right cover,
and left cover.
2) Take out the cassette.
3) Remove the multi-purpose tray.
4) Disconnect the connector from the sen-
sor.
Connector
Figure 3-3-8
5) Disconnect the connector of the sole-
noid cable.
Connector
Figure 3-3-9
3 - 14
6) Open the envelope feeder gear cover.
7) Remove the 2 screws holding the pick-
up module and engine module.
Envelope feeder gear cover
Screws
Figure 3-3-10
8) Close the envelop feeder gear cover.
9) Remove the 5 screws, then pull the
multi-purpose tray pick-up unit toward
you to remove.
Screws
Multi-purpose tray pick-up unit
Figure 3-3-11