Engine Operation; Maintenance Schedule For Engine Components - Rotax 125 DD2 MAX EVO Operator's Manual

MAINTENANCE SCHEDULE FOR ENGINE COMPONENTS

Non-compliance with the specified maintenance schedule could result in engine
ENGINE
Check oil level in
gearbox
Exchange oil in gearbox
Clean exhaust valve and
check if moving freely
Check overflow bottle,
empty if needed
Tear-down inspection of
engine (must be con-
ducted by an authorized
ROTAX® Service
Center)
Clean airfilter, apply oil,
replace in case of visible
damage
Visually inspect connec-
tions between engine
and carburetor and check
fit and tightness of intake
silencer
Visually inspect fuel filter
regarding dirt, replace if
needed
Replace fuel filter
4
Page 8
Edition: March 01 2021
BRP-Rotax
Operators Manual
FREQUENCY
Before After Every
every every 2
hours
opera- opera-
of op-
tion tion
era-
tion
X
X
X
X
ATTENTION
damage.
Every Every Every
5 10 50
hours hours hours
of op- of op- of op-
era- eration
era-
tion tion
X
X
X
X
NOTES
after first 5 hours of op-
eration, then inspect
the oil every 5 hours
and change it if
necessary
Inspect following com-
ponents and replace if
requested: piston, pis-
ton pin and piston pin
bearing, conrod and
conrod bearing, main
bearings of crankshaft.
after each rainy ses-
sion, use air filter
cleaner kit
right after every
collision
Effectivity: 125 MAX DD2 evo