Notification Message And Numberlist; Record Notification Message - Vidicode Octo Manual

7 Notification message and Numberlist

In this Chapter the recording of the notification message is described and the
use of the numberlist is explained.
The notification message is used to announce to the remote party that the
call is being recorded. The setting of the notification message is described in
§ 5.1.7.
The numberlist can be used as Blacklist or Whitelist and can contain 250
numbers. Using the list as Blacklist means the calls to or from the numbers
in the list are not recorded. Conversely, when the numberlist is used as
Whitelist the calls to and from the numbers in the list are recorded while the
rest of the calls is not. The selection of Whitelist or Blacklist is described in §
4.4.

7.1 Record notification message

To record the notification message do the following:
Connect the supplied headset. The black connector is the loudspeaker, the
red connector is the microphone.
• Press the
The display will show:
Notification message
(press PLAY or REC)
The notification message
• Press the
• Speak the message into the microphone of the headset.
• Press
key when you are finished.
• Press the
When you are satisfied with the recording press STOP.
When you want to record again press DELETE.
function key.
DELETE STOP
key to record the message.
key to listen to the recorded message.
Call Recorder manual © Vidicode 2005
43