11-1 Overview Of Troubleshooting - Omron NX701-1 User Manual

11 Troubleshooting

11-1 Overview of Troubleshooting

You manage all of the errors that occur on the NJ/NX-series Controller as events. This allows you to
see what errors have occurred and find corrections for them with the same methods for the entire range
of errors that is managed (i.e., CPU Unit, NX Units, NX-series Slave Terminals, EtherCAT slaves
CJ-series Units).
*1 Only Sysmac devices are supported.
Checking Network
Status
Network Configurator
Troubleshooting
functions
Sysmac Studio
Error management range for
NJ/NX-series Controller
You can use the troubleshooting functions of the Sysmac Studio or the Troubleshooter on an HMI to
quickly check for errors that have occurred and find corrections for them.
Refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503-E1-19 or later) for error types and
details, specific corrections when errors occur, and troubleshooting information on the entire NJ/NX-
series Controller.
11-2
Host computer
Built-in
NJ/NX-series
EtherNet/IP port
CPU Unit
EtherCAT
EtherCAT
slaves
NJ/NX-series CPU Unit Motion Control User's Manual (W507)
HMI
EtherNet/IP
CJ-series Units/
NX Units
Built-in EtherCAT port
*1
, and
Troubleshooter