Overview Of Troubleshooting - Omron NX1P2 Series Hardware User Manual

6 Troubleshooting
6-1

Overview of Troubleshooting

You manage all of the errors that occur on the NJ/NX-series Controller as events.
This allows you to see what errors have occurred and find corrections for them with the same methods
for the entire range of errors that is managed (i.e., CPU Unit, NX Units, NX-series Slave Terminals,
EtherCAT slaves,
*1. Only Sysmac devices are supported.
Checking Network Status
Network Configurator
Troubleshooting
Sysmac Studio
Error management range for NJ/NX-series Controller
You can use the troubleshooting functions of the Sysmac Studio or the Troubleshooter on an HMI to
quickly check for errors that have occurred and find corrections for them.
Refer to the NJ/NX-series Troubleshooting Manual (Cat. No. W503-E1-19 or later) for error types and
details, specific corrections when errors occur, and troubleshooting information on the entire NJ/NX-
series Controllers.
6-2
*1
and CJ-series Units).
Host computer
NJ/NX-series
CPU Unit
EtherCAT
slaves
HMI
EtherNet/IP
Built-in
EtherNet/IP
CJ-series Units and
Port
NX Units
Built-in EtherCAT port
EtherCAT
NX-series NX1P2 CPU Unit Hardware User's Manual (W578)
Troubleshooter