Overview - Omron sysmac EtherNet/IP NJ Series Connection Manual

4．Overview

4. Overview

This guide describes procedures for connecting an ORIENTAL MOTORαSTEP EtherNet/IP
Compatible Driver AZD-□EP (hereinafter referred to as the "Driver") to an OMRON NJ/NX-
series Machine Automation Controller (hereinafter referred to as the "Controller") via
EtherNet/IP and for checking their communication status.
Refer to Section 6. EtherNet/IP Settings and Section 7. EtherNet/IP Connection Procedure to
understand setting methods and key points to operate EtherNet/IP tag data links.
4