Omron NX701-1 User Manual page 29

Manual name Cat. No.
NX-series EtherCAT® W519
Coupler Unit User's Man-
ual
NX-series Data W525
Reference Manual
NX-series NX Units W521
User's Manuals
W522
W566
W523
W524
W540
W565
W567
GX-series EtherCAT W488
Slave Units User's Man-
ual
AC Servomotors/Servo I586
Drives 1S-series with
Built-in EtherCAT® Com-
munications User's Man-
ual
AC Servomotors/Servo I573
Drives G5-series with
Built-in EtherCAT® Com-
munications User's Man-
I576
ual
I577
NJ/NX-series CPU Unit Motion Control User's Manual (W507)
Model numbers Application
NX-ECC Learning how to use an NX-
series EtherCAT Coupler
Unit and EtherCAT Slave
Terminals
NX- Referencing lists of the data
that is required to configure
systems with NX-series
Units.
NX-ID Learning how to use NX
NX-IA Units
NX-OC
NX-OD
NX-MD
NX-AD
NX-DA
NX-TS
NX-HB
NX-PD1
NX-PF0
NX-PC0
NX-TBX01
NX-EC0
NX-ECS
NX-PG0
NX-CIF
NX-RS
NX-ILM
GX-ID Learning how to use the
GX-OD EtherCAT remote I/O
GX-OC terminals.
GX-MD
GX-AD
GX-DA
GX-EC
XWT-ID
XWT-OD
R88M-1 Learning how to use the
R88D-1SN- Servomotors/Servo Drives
ECT with built-in EtherCAT Com-
munications.
R88M-K Learning how to use the AC
R88D-KN-ECT- Servomotors/Servo Drives
R with built-in EtherCAT Com-
munications.
R88M-K
R88D-KN-ECT
R88L-EC-
R88D-KN-ECT-L
Related Manuals
Description
The system and configuration of EtherCAT Slave
Terminals, which consist of an NX-series EtherCAT
Coupler Unit and NX Units, are described along
with the hardware, setup, and functions of the Eth-
erCAT Coupler Unit that are required to configure,
control, and monitor NX Units through EtherCAT.
Lists of the power consumptions, weights, and
other NX Unit data that is required to configure
systems with NX-series Units are provided.
Describes the hardware, setup methods, and func-
tions of the NX Units.
Manuals are available for the following Units.
Digital I/O Units, Analog I/O Units, System Units,
Position Interface Units, Communications Interface
Units, Load Cell Input Units, and IO-Link Master
Units.
Describes the hardware, setup methods and func-
tions of the EtherCAT remote I/O terminals.
Describes the hardware, setup methods and func-
tions of the Servomotors/Servo Drives with built-in
EtherCAT Communications.
Describes the hardware, setup methods and func-
tions of the AC Servomotors/Servo Drives with
built-in EtherCAT Communications.
The linear motor type model and the model dedi-
cated for position controls are available in
G5-series.
27