Overview Of Troubleshooting; Errors And Remedies; Checking The Indicators - Omron G9SP-N20S Operation Manuals

Overview of Troubleshooting

13-1 Overview of Troubleshooting

13-1-1 Errors and Remedies

13-1-2 Checking the Indicators

MS FORCE
Green Red Yellow
Normal operating status
---
---
---
Stopped but no error detected
---
---
---
---
Fatal error detected
---
---
---
Non-fatal error detected
--- --- ---
174
This section describes how to troubleshoot errors that occur in the G9SP-
series Controller.
Use the following procedure when an error occurs.
Problem occurs
Check the indicators.
Identify the error.
Implement
countermeasures
End
The type of error that occurred can be determined by checking the indicators
on the front of the G9SP-series Controller.
LOCK ERR/ MC COMM
ALM
Yellow Red Yellow Yellow
---
---
--- ---
--- ---
--- ---
--- ---
--- ---
--- --- --- ---
--- --- ---
--- ---
--- --- ---
Check the indicators on the front of the
Controller to determine the error status.
Use the G9SP Configurator to read the
detailed error status.
Take measures to eliminate the error
that occurred and to prevent it from
occurring again.
OUT I/O
PWR
Green Yellow Red
--- --- --- Normal operating status after complet-
ing user testing
--- --- --- Normal operating status during user
testing
--- --- --- Operating status is normal, but the
Safety Output does not turn ON.
--- --- --- Internal power not supplied
--- --- --- Stopped in IDLE Mode
--- --- --- Stopped in CONFIGURATION Mode
--- --- --- Memory Cassette operation in progress
(backup/restore)
--- --- --- Critical status: System error detected
--- --- --- Abort status: Minor error detected
--- --- Error detected in Memory Cassette
operation (backup/restore)
--- --- --- Non-fatal error detected
Section 13-1
Status