Part Names And Functions - IDEC WB2F User Manual

Overview 2. Installation & wiring
1. 2

Part names and functions

This section describes the names and functions of WB2F parts.
(2)Emitter LED
Scanner
Reading
Surface
(1)Scan Window
No. Description
(1) Scan Window
(2) Emitter LED
(3) SELECT button
(4) READ/ENTER button
(5) Power-ON Indicator LED Green LED will light up when the WB2F's power is on
(6) Status LED
(7) Position LED
(8) Connecting cable
(9) Connector
(10) Maintenance Port (USB)
3. Operational Check
(10)Maintenance Port (USB)
Scanner
Operational
Surface
(3)SELECT button
The window protects the optical components of the WB2F from dust, debris and mois-
ture.
Lights up during scan operation (based on settings, this is not the only time it will light
up) Lighting modes, the number of LEDs that light up etc. can be altered via settings.
Used to select various functions
Used to confirm various functions that have been selected
The Status LED indicates the operating status of the unit.
(Green): Turns on when reading has succeeded and the read image is matched on com-
parison.
(Orange) : Turns on during a reading operation.
(Red): Turns on when reading fails and the read image is not matched on comparison.
This operation may differ due to the settings.
The status of the Status LEDs also changes due to the unit's operating status.
Displays the Position of the symbol. (1) - (4): The position of the symbol placed in the
WB2Fs FOV will light up on the LED display.
Cable length: 2 m
DIN Connector (manufactured by Hosiden, TCP9386, Male) used to provide power to the
WB2F, or connect to the communication unit.
Port that utilizes the USB interface to perform various maintenance operations (USB 2.0,
Mini-B). If connecting to a host device, use its accessory or any commercially available
USB cable.
1-2
4. Support tool
(4)READ/ENTER button
(8)Connecting cable
Function
5. Appendix
Part names and functions
(6)Status LED
(5)Power-ON
Indicator LED
(7)Position LED
(9)Connector