Cleaning; Cleaning The Scan Window - IDEC WB2F User Manual

1. Overview 2. Installation & wiring

Cleaning

z Cleaning the Scan Window
Keep the scan window free of dust, dirt, moisture and scratches as it will negatively
affect scanning performance.
Inspect the scan window periodically and remove any dirt or dust that may have
accumulated.
Cleaning methods
To clean the scan window, blow the dust/dirt away with an airbrush, and then gently wipe it off with a cotton swab or a
z
similarly soft object.
If moisture has collected on the scan window, wipe with a soft cloth.
z
Always turn the WB2F power off before cleaning the product.
z
Do not use organic solvents such as alcohol, thinner or benzene as they may affect the optics of the WB2F.
z Cleaning the unit
Wipe any dust or dirt off of the WB2F with a soft, dry cloth.
z
If the product is excessively dirty, wipe the surface with a soft cloth that has been soaked in a dilute neutral detergent
z
solution and thoroughly wrung out. Dry with a soft dry cloth.
Do not use organic solvents such as alcohol, thinner, or benzine as this may alter the housing or strip the
paint.
3. Functions 4. Support tool
Scan Window
vii
5. Appendix
Introduction