IDEC WB2F User Manual page 163

1. Overview 2. Installation & wiring
As an example, here is an explanation of barcode reading results when two options, "Check digit check Enabled/Disabled"
and "Check digit transmitting Transmit/Not transmit", are used in different combinations.
e.g. Barcode without check digit
Configuration Item
Symbology
Barcode data
Check digit
Check digit
Check Transmitting
Disabled Not transmit
Disabled Transmit
Enabled Not transmit
Enabled Transmit
* When decorder Code39 is set to "Start/stop character transmitting Disabled"
e.g. Barcode with check digit correctly added
Configuration Item
Symbology
Barcode data
Check digit
Check digit
Check Transmitting
Disabled Not transmit
Disabled Transmit
Enabled Not transmit
Enabled Transmit
* When decorder Code39 is set to "Start/stop character transmitting Disabled"
3 Operational Check
Setting value
Code39
1234567890
Not added
Reading results*
123456789 The last digit "0" is not output.
1234567890 It outputs the barcode data.
Unreadable
The last digit "0" is recognized as the check digit and the code is
checked. It may be read if it is checked correctly.
Unreadable
Setting value
Code39
1234567890
Added ("2")
Reading results*
1234567890 Check digit "2" is not tranmitted.
12345678902 Default
1234567890
The code can be read since the check digit is correctly added.
12345678902
5-33
4 Function Appendix
Setting check digit
1234567890
Remarks
12345678902
Remarks