Connecting The Usb Cable - IDEC WB2F User Manual

1. Overview Installation & wiring
2. 3. 3

Connecting the USB Cable

z USB connector pin assignment
USB connector is Mini-B (Female) type.
Pin Number Signal name
1 VBUS
2 D-
3 D+
4 NC
5 GND
The WB2F cannot be powered via the USB connector.
z Connecting the USB connector
When connecting the unit to a host device, firmly insert the USB connector straight into the USB port on the host device
in the correct orientation.
To connect the WB2F, open the Maintenance Port Hatch and insert the USB Mini-B connector.
Maintenance Port
(USB Port)
USB Mini-B Connector
3. Operational Check
Function
bus power
Data-
Data+
No connection
Ground
Host device USB port
4. Function
USB Connector (Mini-B)
5
USB-A Connector
2-15
5. Appendix
1
Wiring