IDEC WB2F User Manual page 63

1. Overview 2. Installation & wiring
Stop Reading can execute each of the following five commands including the original.
Original Command :
z
Alias0 :
z
Alias1 :
z
Alias2 :
z
Alias3 :
z
You can change the control command "Start Reading" and "Stop Reading" according to the command system
on the system or host device already in operation.
Any arbitrary character string can be set as an alias but command transmission and reception may not be
performed correctly if the alias is identical to another existing communcication command, partially match-
es another communication command, it is extremely short.
Register a character string only after confirming normal operation.
3 Operational Check
^stop CR LF
STX STOP ETX
off CR
ESC CANCEL CR LF
halt
4-27
Function 5. Appendix
Slave Mode