Table of Contents
Advertisement
1. Overview
2. Installation & wiring
z Detailed procedure using the READ/ENTER button
1
Turn on the power to the unit while pushing the READ/ENTER but-
ton.
2
Put the READ/ENTER button ON until you can confirm the Status
LEDs (green/orange/red) have flashed. (Approximately 5 seconds
or longer)
The Status LEDs (green/orange/red) will all flash (2 seconds on, 2
seconds off ) and the WB2F switches to maintenance mode.
3 Operational Check
(2) Turn on
power supply
4-51
Function
5. Appendix
Maintenance mode
Push and hold
(1)
5 s
Status LEDs
(R)
(O)
(G)
Advertisement
Table of Contents
