Table of Contents
Advertisement
Overview
2. Installation & wiring
1. 3
System configuration
The typical system configuration when operating the WB2F is as follows.
With the Communication Unit
(for Maintenance
Purposes)
PC
RS-232
RS-422
Ethernet
Host device
The device driver must be installed prior to connecting the WB2F to a PC via USB. Refer to
the USB driver]
3. Operational Check
USB
WB2F
5V DC power supply
RS-232
I/Os
(DIN Connector)
Communication Unit
PLC, External Light Source
on
page 5-31
for installation instructions.
4. Support tool
24V DC
Power Supply
24V DC Power Supply
External Input
External Output
1-3
5. Appendix
System configuration
Sensor
F [5. 14 Installing
Advertisement
Table of Contents
