Table of Contents
Advertisement
1. Overview
2. Installation & wiring
Symbology name
ID
TELEPEN
B
Code11
H
GS1 Databar
e
Data Matrix
d
QR Code/
Q
Micro QR Code
PDF 417/
Micro PDF417/
L
GS1 composite
Japan postal
X
3 Operational Check
0 : Full ASCII mode
1 : Number limited mode
0 : Check character 1 digit is validated and transmitted.
1 : Check character 2 digits is validated and transmitted
3 : Check character is validated but not transmitted.
X : Check character is not validated.
0
1 : ECC 200
2 : ECC 200, FNC1 in first or fifth position
3 : ECC 200, FNC1 in second or sixth position
0 : QR Code Model 1 symbol (in accordance with AIM ISS 97-001)
1 : QR Code 2005 symbol, ECI protocol not implemented
3 : QR Code 2005 symbol, ECI protocol not implemented, FNC1 implied in first position
5 : QR Code 2005 symbol, ECI protocol not implemented, FNC1 implied in second position
1 : Reader set to follow protocol of ISO/IEC 15438 for Extended Channel Interpretation (All
data characters 92 doubled)
3 : Code 128 emulation: implied FNC1 in first position
4 : Code 128 emulation: implied FNC1 after initial letter or pair of digits
5 : Code 128 emulation: no implied FNC1
Modifier values 3, 4 and 5 are applicable only to MicroPDF417 symbols.
9
5-25
4 Function
AIM ID
Modifier
Appendix
AIM symbology ID table
Advertisement
Table of Contents
