Table of Contents
Advertisement
1. Overview
2. Installation & wiring
z Multiple Symbol Read (Differs from Multi-Read)
Multiple symbol read will continue to execute reads until the maximum number of symbol readings is attained. Symbol
Reading will cease and results will be output in batch if either maximum number of symbol readings is attained, Stop
Reading is entered or Reading Timeout elapses. This function is compatible with Single Read, (edge activation/level activa-
tion) only.
If number of symbol readings
Imaging Area
Outut Format is as follows
Global
The First One
Prefix
Reading Result
Second Time.
Batch Output
Reading Result
Separator
Symbol Reading
z
At most 32 items can be simultaneously read.
z
Can be used even if there are various symbologies in the imaging area at once.
z
If here is more than one of the same symbol (same symbology and data) in the imaging area,the WB2F will
z
treat them as one symbol.
A maximum of 8 characters can be set for the Batch Output Separator.
z
If the number of symbols placed in the imaging area exceeds the max number of symbols that was entered
z
in the scanner's settings, the WB2F will only read and output up to the max number of symbols determined
in the settings.
3 Operational Check
Symbol
Batch Output
Separator
Function
Global
Prefix
Global
Suffix
4-12
5. Appendix
Slave Mode
Advertisement
Table of Contents
