IDEC WB2F User Manual page 55

1. Overview 2. Installation & wiring
Item
Verification Results
Local Suffix
Check Digit
Global Suffix
The order in which additional information will be added is as follows:
[Global Suffix][Local Suffix][Data Size][Elapsed Time][AIM ID}{Position Information]_[symbol length],[Veri-
fication Result][Reading Result Data][Local Suffix][Check Digit][Global Suffix]
e.g. If all additional information examples outlined
to symbol data "ABCD"the following data will be transmitted.
^P00;1234_12:34:56_]E0_P=(0000,0000)(1279,0000)(1279,0959)(0000,0959)_N=0123_<OK:000>ABC-
DEFGS00;12 CR
e.g. If all items except [AIM ID] outlined
data "ABCDEFG"the following data will be transmitted.
^P00;1234_12:34:56_P=(0000,0000)(1279,0000)(1279,0959)(0000,0959)_N=0123_<OK:000>ABC-
DEFGS00;12 CR
If you add additional data such as [Data Size], [ Elapsed Time], {Aim ID], {Position Information] and [symbol
z
length], an item separator "_" will be affixed to the end of each of the added data. If you do not add any ad-
ditional data, the item separator will not be affixed.
The order of the items cannot be changed.
z
Label options such as Position Information "P="and symbol length "N="can be set to activate/deactivate in
z
settings.
3 Operational Check
Examples:
(Additional
Information)
During verification, Match/Unmatch results will be added.
Once verified, the characters OK and the matched master data number (3
characters) will be added.
<OK:000>
When read data matches sequentially inserted master data, "<OK:255>"
will be added. If mismatched, "<NG:--->" will be added.
Will only be added during verification.
Suffix that can be added to each symbol type. A maximum of 4 characters
S00;
can be added.
Will add a check digit in the form of 2 digit hexadecimal number.
12 Refer to F [5. 8 Check digit calculation method]
culation methods.
Suffix with a maximum of 8 characters that can be added to any data out-
CR LF
put.
F [Examples: (Additional Information)]
LF
F [Examples: (Additional Information)]
LF
4-19
Function 5. Appendix
Note
on page 5-21
on page 4-18
on page 4-18 were added to symbol
Slave Mode
for cal-
were added