Functions; Connection Settings - IDEC WB2F User Manual

7.3. Functions

7.3.1. Connection settings

This configuration screen is for connecting WB2F and the computer.
When WB2F Support Tool is started, the following Connection Settings screen is initially displayed.
15
16
No. Name
1 Com port
2 Communication speed
3 Data length
4 Parity
5 Stop bit
6 Flow control
7 Prefix
8 Suffix
9 Check digit
10 Linefeed condition 1
11 Linefeed condition 2
12 Default settings
Connection
13
/Disconnection
14 Automatic connection
15 Message output 1
16 Message output 2
17 / 35
WB2F Support Tool User's Manual
1
2
3
4
5
6
7
8
9
10
11
Selects the communication port. You can select only a valid port.
Sets the communication speed.
Sets the data length.
Sets the parity bit.
Sets the stop bit.
Sets flow control (handshake).
Sets the text string added at the beginning of communication commands.
Sets the text string added at the end of communication commands.
Sets whether or not a check digit is added to setting commands.
Sets the conditions for line breaks on the console screen. A line break is
performed when console line break condition 1 or console line break condition
2 is met.
Returns Nos. 1 to 11 to the default values.
Starts or stops the connection between WB2F and the computer.
Starts the connection between WB2F and the computer automatically.
Displays a description of the selected item.
Displays the communication result and communication settings when the
automatic connection is started.
WB2F-SOFT-SUPPORT-TOOL-MANUAL-E
12
13
14
Description
B-1956(0)