IDEC WB2F User Manual page 25

1. Overview Installation & wiring
Using PoE
Connect the PoE to the Communication Unit's Ethernet Port. Even if using PoE, ground the FE terminal of the external
power supply's port connector.
Ethernet Port
External
Power Port
Turn the communication unit's power to OFF prior to performing any wiring work.
z
Do not simultaneously use an external power supply and PoE.
z
PoE is treated as Class 0.
3. Operational Check
Ethernet
PoE
(Alternative A/B)
Pin assignment for the External Power Supply Port Connector
24V DC
0V
FE
2-8
4. Function
24V DC
5. Appendix
Wiring