IDEC WB2F User Manual page 150

1. Overview 2. Installation & wiring
No.32 Start Decoding Processing Time measurement (Reading Parameter table specification)
z
Transmission Example
Prefix Command
^ sup1
A value between "00" to "07" will be entered as the Specified table number.
No. 34 Start Symbol Position Measurement (Reading Parameter Table Specification)
z
Transmission Example
Prefix Command
^ sup2
A value between "00" to "07" will be entered as the Specified table number.
No. 46 Acquire Version Information
z
Response example
Prefix Model number
^ WB2F-100S1B
WB2F-100S1B will be entered for model number.
The main application version is the numeric values in the format 3-digit. 3-digit. 2-digit that follow A- which indicates
the main application.
The bootloader version is the numeric values in the format 3-digit. 3-digit. 2-digit that follow B- which indicates the
bootloader.
No.47 Get communication settings (current values), No. 48 Get communication settings (memory values)
z
Response example
Prefix
Communication
speed
^ 03,
The RS-232 settings are the setting values in
The communication command is the setting values in
Table] on page 4-54.
3 Operational Check
Space Specified Table
(half size) Number
00
Space Specified Table
(half size) Number
00
Main application
Separator
version
/ A-001.000.00
RS-232 settings
Data Length Parity
01, 01,
Communication command Function
Check digit
Reserved
addition
00, 00,
Communication command Function
Prefix Prefix
5e, 00,
Communication command Function
Suffix Suffix
0d, 0a,
"RS-232 settings" in F [4. 6 Configuration Item Table]
"Communication Command"
5-20
4 Function
Control Commands (Details)
Suffix
CR LF
Suffix
CR LF
Bootloader
Separator
version
/ B-001.000.00
Stop bits Flow control
00, 00
Uppercase
Reserved
response
00, 00
Prefix Prefix
00, 00
Suffix Suffix
00, 00
on
in F [4. 6 Configuration Item
Appendix
Suffix
CR LF
Separator
/
Separator
/
Separator
/
Suffix
CR LF
page 4-54.