5. 15 Setting Check Digit - IDEC WB2F User Manual

1. Overview 2. Installation & wiring

5. 15 Setting check digit

Each symbol has two settings, "Inspection of check digit Enabled/Disabled" and "Check digit transmitting Tranmit/Not
transmit". The settings that define the manner in which the WB2F operates are as follows.
The WB2F recognizes the last digit (excluding the start/stop characters) as the check digit when the check digit is defined
in each symbology.
Inspection of check digit
Enabled : Check digit is inspected.
z
The code can be read when the check result is correct, but cannot be read if the check result is incorrect.
Disabled : Check digit is not inspected.
z
Since the check digit is not inspected, the code can be read whether or not the check digit is correct.
Check digit transmitting
Tranmit : Check digit is tranmitted.
z
The check digit is tranmitted when the check digit is added to the barcode. The last digit is transmitted when the
check digit is not added.
Not transmit : Check digit is not transmitted.
z
The check digit is not transmitted when the check digit is added to the barcode. The last digit is not transmitted
when the check digit is not added.
3 Operational Check
5-32
4 Function Appendix
Setting check digit