5. 12 Initialization Barcode - IDEC WB2F User Manual

1. Overview 2. Installation & wiring

5. 12 Initialization Barcode

The Initialization barcode, when scanned, returns the WB2F to its factory default settings
If the configuration barcode is read in maintenance mode with the READ/ENTER button, the WB2F settings will be initial-
ized to the factory defaults.
Initialization Barcode
Be aware that the initialization barcode cannot be read using external input or control commands.
To switch to maintenance mode, refer to
4-50.
3 Operational Check
F [4. 4. 1 Switching operation to maintenance mode]
5-27
4 Function Appendix
Initialization Barcode
on page