Part Names And Functions - IDEC WB1F Series User Manual

Overview 2. Installation & wiring
1. 2

Part names and functions

This section describes the names and functions of WB1F parts.
(4) Connecting cable
No. Name
(1) Reading window
(2) Operation button
(3) Indicator LED
(4) Connecting cable
3. Functions
(3)Indicator LED
(Green)
(Orange)
(Red)
The unit reads barcodes through the reading window.
While the unit is reading barcodes, the internal emitter LED turns on.
Use the operation button to turn on the barcode reading request and to switch the opera-
tion mode.
The indicator LED indicates the operating status of the unit.
(Green): Turns on when reading has succeeded and the read image is matched on comparison.
(Orange) : Turns on during a reading operation.
(Red): Turns on when reading fails and the read image is not matched on comparison.
This operation may differ due to the settings.
The status of the indicator LEDs also changes due to the unit's operating status.
RS-232 type
This type communicates via the RS-232 interface.
z
Performs control of OK output, NG output, and PWM output.
z
Judges the external trigger input status and turns the reading request on and off.
z
Connect to the power supply (5V DC).
z
USB type
This type communicates via the USB interface (USB virtual COM).
z
4. Support tool
(1) Reading window
(2) Operation button
* The illustration is the WB1F-100S1B.
Function
5. Appendix
Part names and functions
RS-232 Type USB Type
1-2