Table of Contents
Advertisement
1. Overview
2. Installation & wiring
4. 3. 5
Autotuning
The auto-tuning automatically adjusts parameters to optimize symbol reading performance and saves those values to a
read parameter table.
There are three types of auto-tuning.
For more details on the auto-tuning and its various settings, refer to
on
page 4-54.
Standard tuning
Tuning that is specialized for easy to read symbols (such as those printed on paper). Use this setting for standard opera-
tions.
Detailed Tuning
Will perform auto-tuning that is specialized for difficult symbols (such as DPM). Use this function when standard tuning
has failed.
* It may take up to several minutes for tuning to complete as the WB2F searches for the optimum image filter.
Custom tuning
This function is adjusting value of the auto configuration after confured value of the auto configuration.
Use confuring value of the auto configuration when you would like to change the value of the auto configuration.
Auto-tuning setting values are as follows.
Configuration Item
Read parameter table registration destina-
tion number
Tuning mode
Exposure time limit value
Symbol Registration
White and black reversal symbol reading
Image Filter
Imaging parameters
Decode Parameter
Read Timeout Time
Compatible Symbol
3 Operational Check
F "Auto-tuning"
Standard
Can be set arbitrarily
High speed mode
Without restriction
Register only tuned symbols
Auto
Do Not Use
Prioritize Distance
Prioritize readability
Prioritize reading perfor-
Prioritize Stablity
10s
Data Matrix, QR Code, Micro
All symbols
4-48
Function
5. Appendix
Setup support mode
in
[4. 6 Configuration Item Table]
Details
Custom
Can be set arbitrarily
Use
mance
QR Code
Advertisement
Table of Contents
