Output Data Additional Information - IDEC WB2F User Manual

1. Overview 2. Installation & wiring
4. 2. 3

Output data additional information

Output data additional information is used to add additional information to Reading Result.
When performing a data output from a host device, there are two different types of data.
For more information on Output Data Additional Information, refer to
page 4-54.
z Single Read or Multi-read sequential output format
Global Prefix
If a Reading Success occurs, the read data wil be input as [Reading Result Data]
z
If a Reading Failure occurs, the 8 character Reading Failure Output characters set in advance will be input as the [Reading
z
Result Data]
A maximum of 8 characters each can be set for both [Global Prefix] and [Global Suffix]
z
3 Operational Check
Reading Result Data
4-15
Function
F [4. 6 Configuration Item Table]
Global Suffix
5. Appendix
Slave Mode
on