Connecting To A Pc - IDEC WB2F User Manual

1. Overview 2. Installation & wiring
3. 1. 3

Connecting to a PC

z If you use a communication unit
If you use the WB2F with the communication unit, refer to
Communication Unit] on
After completing wiring, turn power ON
WB2F
USB Mini-B Connector
USB Cable
z If you do not use a communication unit
If you use the WB2F without the Communication Unit refer to
out the Communication Unit]
After completing wiring, turn power ON
WB2F
Caution Caution
Note, the DC power supply voltage requirements varies depending on whether you use a
z
communication unit or not. Using a voltage level other than what is specified within this
manual may result in damage and/or malfunction.
Do not reverse the Power Supply connection. Doing so may result in damage.
z
Operational Check
page 2-5 for wiring instructions.
Communication Unit
DIN Connector
USB-A Connector
on page 2-12.
USB Mini-B Connector
USB Cable
4. Function
F [2. 3. 1 Wiring Instructions: Connecting the WB2F to the
Pigtail Cable
PC
F [2. 3. 2 Wiring Instructions: Setting up the WB2F with-
DC Power Supply
Pigtail Cable
USB-A Connector
3-2
5. Appendix
Performing an Operational Check using a PC
DC Power Supply
24V DC
5V DC
PC