Names And Functions Of Its Parts - IDEC WB2F User Manual

1. Overview 2. Installation & wiring
4. 7. 2

Names and functions of its parts

Will explain the various functions and settings of the communication unit.
(1)Scanner Port
(2)Operation
changeover switch
(3)Display LED (5V DC )
(5)Input/Output/RS-232/RS-422 Port
(6)Ethernet Port
(7)External
Power Supply Port
No. Description
(1) Scanner Port
(2) Operation changeover switch Used to changeover operation mode
(3) Display LED (5V DC )
(4) Display LED (I/O)
Input/Output/RS-232/RS-422
(5)
Port
(6) Ethernet Port
(7) External Power Supply Port
Connector for Input/Output/
(8)
RS-232/RS-422 Port
Connector for External Power
(9)
Supply port
Refer Manual(B-1946) and Users Manual(B-1963).
z
For details on the dimensions of the communication unit refer to
z
on page 5-7.
3 Operational Check
(4)Display LED (I/O)
A connector of the end of scanner is DIN connector.
For connection of WB2F in this manual.
Lights up (green) when power is on
Green LED flash with External input and External output of WB2F.
The communication unit is connected with "input/output /RS-232/RS-422 Port".
Will connect to a Ethernet Compatible device.
PoE (Power over Ethernet) compatible
The communication unit is connected with "External Power SUpply Port".
Terminal plug: DFMC1.5/9-ST-3.5 (manufactured by PHOENIX CONTACT)
z
It is used for control WB2F.
z
It is connected with equipment of RS-232/RS-422.
z
External Power Port
Terminal plug: FRONT-MSTB2.5/3-ST-5.08 (manufactured by PHOENIX CONTACT)
4-94
Function 5. Appendix
Communication Unit
(8)Connector for Input/Output
/RS-232/RS-422 Port
(9)Connector for External
Power Supply port
Function
F [5. 3 Dimensional outline drawings]