Integrating With A Polycom Video System - Polycom Pano Deployment Manual

Integrating with a Polycom Video
System
Topics:
▪ Supported Polycom Video Systems
▪ Connecting a Polycom Video System Using Two Monitors
▪ Connecting a Polycom Video System Using Three Monitors
▪ Test Content Sharing
▪ Unpair a Polycom Video System
The Pano system can send content to a Polycom video system. Once your preferred setup is complete,
content sharing is enabled; the Pano system detects when content is available and automatically
presents it to the Polycom video system.
You can pair a Pano system with a Polycom video system using two or three monitors:
▪ Two Monitors Configure the Pano system and Polycom video system to present content on the
second monitor.
▪ Three Monitors Integrate the Pano system with the Polycom video system and configure the
Pano system to present content on the third monitor. For this setup, the Pano system content
displays on two monitors.
Note: You can't integrate the Pano system with a Polycom video system if the latter is paired with a Poly
Trio system. This is because the Polycom video system becomes a peripheral of the Trio system
when the two are paired, resulting in some changes to what you experience with a standalone
endpoint.
Remember the following when enabling content on a Polycom video system:
▪ The Pano system must be used to share content during a meeting.
▪ Far-end annotations on content from the Pano system are not supported.
▪ Make sure you disable the VisualBoard application in the system web interface.
Note: There are no API controls from the Pano system to the Polycom video system.
Polycom recommends the following when integrating your Pano system with a Polycom video system:
▪ Do not display the IP address on the Polycom video system local interface. This prevents users with
personal devices from using that IP address to connect to the Pano system.
▪ When integrated with a RealPresence Group Series system, if you've enabled security code on the
Pano device, you may need to start content on the Group Series in order to view the Pano home
screen (where the security code is shown). Disabling the security code allows users to connect to
the Pano device without first having to see the Pano home screen.
Polycom, Inc. 20