Te01: Installation And Activation Of Loadable Compile Cycles - Siemens SINUMERIK 840D sl Function Manual

TE01: Installation and activation of loadable compile
cycles
Contents
The following sections describe how technology and special functions in the form of individual
loadable compile cycle files (*.ELF) are installed and activated in the control.
Technology functions available from Siemens in the form of compile cycles
● 1D/3D clearance control in position control cycle
Compile cycle: CCCLC.ELF
References: Function Manual Special Functions; Clearance Control (TE1)
● Handling transformation package
Compile cycle: CCRCTRA.ELF
References: Function Manual Special Functions; Handling Transformation Package (TE4)
● Setpoint exchange
Compile cycle: CCSETP.ELF
References: Function Manual Special Functions; Setpoint Exchange (S9)
● Axial coupling in the machine coordinate system (MCS coupling)
Compile cycle: CCMCSC.ELF
References: Function Manual Special Functions; MCS Coupling (TE6)
● Continue machining at the contour (retrace support)
Compile cycle: CCRESU
References: Function Manual Special Functions; Retrace Support (TE7)
● Fast laser switching signal
Compile cycle: CCHSLC.ELF
References: Function Manual Special Functions; Cycle-Independent Path-Synchronous
Signal Output (TE8)
● Axis pair collision protection
Compile cycle: CCPROT.ELF
References: Function Manual Special Functions; Axis Pair Collision Protection (TE9)
Compile cycle files (*.ELF) and CNC software versions
Compile cycle files (*.ELF) that have been generated for CNC software versions up to SW 4.4
cannot run on systems with CNC software versions as of SW 4.5.
Technology and special functions provided by Siemens in the form of compile cycles
New compile cycle files (*.ELF) for Siemens technology and special functions for CNC software
versions as of SW 4.5 can be obtained from your regional Siemens sales office.
Special functions
Function Manual, 01/2015, 6FC5397-2BP40-5BA2
13
549