Maintenance
Introduction
This chapter contains general maintenance and cleaning instruc-
tions for the Novajet PROe series printers.
Scheduled Maintenance
Scheduled maintenance consists of a list of checks that are planned
to be performed on a regular basis or when conditions warrant it.
Scheduled maintenance can be thought of as preventive mainte-
nance since its purpose is to prolong the life of the printer. It is not
intended to repair or isolate an existing problem, though it can
sometimes be helpful in detecting a condition due to a weakened
component that has not yet completely failed.
Below is a list of scheduled maintenance checks and their periodic-
ity.
Clean external areas:
Clean slide shaft:
Clean service station:
Clean encoder strip:
Clean cartridge dimples:
Clean flex cable contacts:
Clean and inspect motor gears:
Clean and inspect MPCB:
Clean and inspect carrier assembly:
Reseat connectors on MPCB:
Reseat connectors on carrier board:
Replace carrier bushings:
3
weekly, or
as required
monthly
biweekly
monthly
if prime fails
if prime fails,
or cartridge
is replaced
annually
annually
annually
annually
annually
biannually
43